|
|
Neatform Bendy MDF
Neatform has a smooth pre sanded (120 grit) surface, which makes it ideal for painting, veneering or laminating. Combine this with the consistency and dimensional stability of the high quality MDF used to make Neatform, it has become the preferred bendable material for many applications including: columns, counter fronts, wavy walls, ceilings, stage and film sets and commercial cabinet making.
Neatform can be used to fabricate lightweight components. Also, it can be used in conjunction with bending plywood to create components where structure, impact resistance and screw holding ability is important. The possibilities are endless... Standard sizes available via UK stockists are: Also available in 1220x607x6mm via selected DIY Outlets Other sizes and thicknesses available to order
|
Neatform
is a high quality bendable sheet material. It is a processed
sheet of MDF, which is widely recommended by architects and
designers and used by woodworkers where top quality curved shapes
or surfaces are required.
Neatform can be attached directly to
a framework or used to surface another material such as bending
plywood. Alternatively, using the double skin technique, two
sheets of Neatform can be glued together to create freestanding
double sided curves, which enable greater design flexibility.